彩票上的组三和组六
86-755-83577116    
Shenzhen Matrix Battery Co.,Ltd
Home > News > Battery Industry News

News

9 easy steps to double lead-acid battery's lifespan.


1.   If battery is completely discharged, charge the battery for at least 30 minutes

2.   Open all battery′s cells in accordance with the manufacturer’s instructions.

3.   Make sure the volume of electrolyte (in all battery′s cells) covers at least the electrode plates; if necessary, add distilled water while leaving sufficient space for PowerBatt to be applied.

4.   Pour 60ml per each cell per each 100Ah of PowerBatt Prevent into each cell according to the maximum manufactured capacity for an electrolyte. If this is not possible due to a high level of electrolyte, add as much PowerBatt as possible to reach the maximum level of electrolyte indicated on the cell (never above the maximum level) and rest of the calculated volume at later stage (usually couple of weeks later), when the volume decreases due to electrolyte evaporation.

5.   Apply PowerBatt slowly, in order to prevent the battery from a sudden chemical overreaction. It is recommended to apply the quantity of PowerBatt in 3-4 instances with 20 minutes in between (In hot climate wait at least 30 minutes). Continuously observe the temperature of the electrolyte, do not add PowerBatt if the temperature of cells rises above 40 degrees Celsius.

6.   Wait for 60 minutes, or until the reaction terminates (bubbles are no longer formed violently and the cell temperature begins to decrease).

7.   Add back the central distilled water distribution system according to the manufacturer instructions.

8.   Use standard charger to charge battery fully and then place battery back into operation. 

9.   Repeat the procedure every 12 months.


Matrixbattery
TEL:
0755-83577116
skype
skype
阿里巴巴

返回顶部

彩票上的组三和组六
天津快乐十分走势图表 江西时时彩还有漏洞吗 下载型网站赚钱 广东26选5k线图 山东11选5彩票通软件下载 福建快3 五分彩是什么东西 重庆时时彩加减算法 大有彩票安卓 辽宁快乐12任选开奖基本走势图